Introducing the New
Wireless!
1800PVSW PortaScopetm
Series!
PATENT PENDING
1800PVSW 5.5mm non
Articulating Wireless Portascope !
1800PVSWA 6.5mm
above with 2 way Angulation Portascope!
WORLDWIDE USE NTSC /
PAL !
INTERNAL IMAGE /
VIDEO STORAGE
HIGH RESOLUTION!
LED lamp and micro camera technology.
It has an auto focus function.
We can supply cable 2 to *30 meters!
in length, 5.5mm outer diameter OD.
The resolution is 400,000 pixels
Control knob in handgrip for lighting calibration.
Screen display controlled through the handgrip, record pictures or live
video to SD card!
Perfect for Aircraft, Marine, Locksmiths, H.V.A.C. Auto-Repair
+ More!
CLICK TO PLAY ACTUAL VIDEO!
Take This Out into the Field or in house for Industrial Inspections,
with no need for heavy TV Monitors
Bright LED lights! 3.5" TFT LCD Monitor! Video out / SD Memory card
slot!
LED lamp and micro camera technology.
It has an auto focus function.
The resolution is 400,000 pixels
Transfer photos and/or Videos direct to your PC harddrive!
Standard Features:
applications!
Use your PC* to View Procedures and Store
Images! No need for separate storage device!
1800PVSW3
3
METER Only $2499.00+S&H (
5.8 mm diameter
non obedient tube ) 1800PVSW6
6
METER Only $2999.00+S&H (
5.8 mm diameter
non obedient tube ) 1800PVSW10 10
METER Only $3499.00+S&H (
5.8 mm diameter
non obedient tube ) 1800PVSW20 20
METER Only $3999.00+S&H (
5.8 mm diameter
non obedient tube )
< 1800PVSW30 30
METER Only $4999.00+S&H (
5.8 mm diameter
non obedient tube )
note: tube is rubber coated, bend radius of 3 1/2"
None of 1800Endoscope.com
Borescope Equipment is intrinsically safe
or explosion proof / ESD. Do not deploy in hazardous atmospheres.
When using this device in any hazardous conditions. Consult with any
Hazmat regulations or NDT safety cautions and conditions. Due to the low
cost of this device, we do not claim that this product can be for use in
any Potentially Explosive Atmospheres exist where there is a risk of
explosion due to mixtures of gas/air, vapor/air, dust/air or other
flammable combinations.Or that it is safe from Electrostatic discharge (ESD).
Consult www.esda.org
In such areas there is a necessity to eliminate sources of ignition such
as sparks, hot surfaces or static electricity which may ignite these
mixtures.
Where electrical equipment has to be used in these areas it must be so
designed and constructed as to not create sources of ignition capable of
igniting these mixtures.
Before electrical equipment can be used in a potentially explosive
atmosphere a representative sample has to be fully tested and certified
by an independent authority such as BASEEFA in the U.K. or UL in the
U.S.A. see Warranty Page
